Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Pro zone
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Information for dealers
- Water connection
- Electrical connection
- Installation information
- Installation dimensions
- Limiting the opening angle of the appliance doors
- Changing the door hinges
- Building in the appliance
Installation information
94
Calculation of cabinet door size
The width of the cabinet door
depends on the style of the kitchen and
the gap between the unit door panels.
When calculating the height of the
cabinet door, remember that the top
edge of the door must be at the same
height as that of the doors of the
adjacent units.
The following gaps are required:
– The horizontal gap between the
cabinet door and the cupboard door
above it must be at least 1/8" (3mm).
– The vertical gap between the cabinet
doors should be approx. 1/8" (3mm).
The exact value will depend on the
radius of the edge of the cabinet
door.
The cabinet door must be fitted
correctly and not under tension.
Tip: Please also see the diagram and
information on the following pages on
calculating the cabinet door height.