Operating and Installation Instructions

Installation information
93
If you wish to fit a grille in the
ventilation openings, the ventilation
openings must be larger than 31
square inches. The passage volume
of 31 square inches is the total area
of the opening slits in the grille.
– Important! The larger the ventilation
slits, the more economically the
appliance will work.
The ventilation slits must not be
blocked or obstructed in any way.
Clean the ventilation slits on a
regular basis.
Top ventilation gap
The ventilation gap at the top of the
appliance can be constructed in
different ways:
a
Directly above the appliance with a
ventilation grille (free airflow of at
least 31sqinches (200cm²))
b
Between the kitchen cabinetry and
the ceiling
c
In a suspended ceiling
Cabinet doors
An upper cabinet door for the
refrigerator section and a lower cabinet
door for the freezer section are
required.
The cabinet doors must be at least
5/8“ (16mm) / 3/4” (19mm) thick.
 If the cabinet doors are too
heavy, this can cause damage!
Fitted cabinet doors that exceed the
permissible weight can cause
damage to the hinges, which can
affect the functioning of the
appliance.
Before fitting cabinet doors, ensure
that the weight of the door does not
exceed the maximum permitted.
Appliance Maximum weight of
cabinet door
Upper
cabinet
door
Lower
cabinet
door
KFNS 37692
iDE-1
37.5lbs
(17kg)
26.5lbs
(12kg)