Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Pro zone
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Information for dealers
- Water connection
- Electrical connection
- Installation information
- Installation dimensions
- Limiting the opening angle of the appliance doors
- Changing the door hinges
- Building in the appliance
Water connection
87
Connecting the water supply
line
Before establishing the fresh water
connection, ensure that the machine
is disconnected from the power
supply.
Before the cold water line is used for
the first time, it must be vented by a
suitably qualified plumber.
The fresh water connection is at the
back of the machine, at the bottom.
The connection parts included with the
machine permit the connection of
various water lines (water line not
supplied). Do not connect old water
lines that have been used before.
The solenoid valve has a has a 3/4"
BPT connection thread.
Remove the cap from the solenoid
valve.
Insert the adapter into the union
nut.
Risk of damage!
Do not insert the water filter the
wrong way around, as this can cause
damage.