Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Pro zone
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Information for dealers
- Water connection
- Electrical connection
- Installation information
- Installation dimensions
- Limiting the opening angle of the appliance doors
- Changing the door hinges
- Building in the appliance
Information for dealers
85
Turning off Demo mode
Thesymbol is illuminated in the
display.
Touch the settings sensor.
All symbols available for selection will
appear in the display and thesymbol
flashes.
Touch the sensors for setting the
temperature (or) repeatedly
until thesymbol flashes in the
display.
Touch the OK sensor to confirm your
selection.
The1 symbol flashes in the display
(meaning: Demo mode is active) and
thesymbol is illuminated.
Touch theorsensor so that the
symbol 0appears in the display
(meaning: Demo mode is inactive).
Touch the OK sensor to confirm your
selection.
The selected setting will be adopted
and thesymbol will flash.
Touch the settings sensor to leave the
settings mode.
Otherwise the appliance will exit the
settings mode automatically after
approximately one minute.
Demo mode is turned off and
thesymbol disappears.