Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Pro zone
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Information for dealers
- Water connection
- Electrical connection
- Installation information
- Installation dimensions
- Limiting the opening angle of the appliance doors
- Changing the door hinges
- Building in the appliance
Frequently Asked Questions
80
Problem Possible cause and solution
The LED lighting is not
working on any of the
shelves.
Liquid has spilt onto the LED lighting on one of the
shelves or the metal discs (contacts) in the left-hand
shelf supports.
The safety switch-off mechanism has switched off the
LED lighting on all the shelves.
Wipe the stainless steel strip with LED lighting with
a damp cloth and dry it or let it dry outside the
appliance. Clean the metal discs (contacts) in the
shelf support in the same way.
Ensure that the contacts are clean and dry before
replacing the shelves with LED lighting.
Push in the shelf until it clicks into position.
Close the appliance door.
When the door is opened again, the interior lighting
will come on.
If this does not happen, there is a fault.
Contact Miele Service.