Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Pro zone
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Information for dealers
- Water connection
- Electrical connection
- Installation information
- Installation dimensions
- Limiting the opening angle of the appliance doors
- Changing the door hinges
- Building in the appliance
IMPORTANT SAFETY INSTRUCTIONS
8
For safety reasons, this appliance may only be used after it has
been built in.
The machine must be disconnected from the power supply during
installation, maintenance, and repair work, and installation work on
the fresh water connection. The machine is only completely isolated
from the power supply when:
– the fuse has been tripped, or
– the circuit breaker has been tripped, or
– the power cord has been unplugged. Pull on the plug and not on
the cord when disconnecting it from the power supply.
Unauthorized installation, maintenance, and repairs, or a faulty
fresh water connection can cause considerable danger for the user.
Installation, maintenance, and repairs, installation work on the fresh
water connection, and all repairs on the ice/water outlet must only
ever be carried out by a Miele authorized technician.
The ice cube maker must only be connected to a cold water line.
Any manufacturer's warranty will be void if the appliance is not
repaired by a Miele approved service technician.
Defective components should only be replaced by Miele original
parts. Only with these parts can the manufacturer guarantee the
safety of the appliance.