Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Pro zone
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Information for dealers
- Water connection
- Electrical connection
- Installation information
- Installation dimensions
- Limiting the opening angle of the appliance doors
- Changing the door hinges
- Building in the appliance
Frequently Asked Questions
78
The interior lighting is not working.
Problem Possible cause and solution
The interior lighting is
not working.
The appliance has not been turned on.
Turn the appliance on.
Sabbath mode is on: The display is black and the
appliance is cooling.
Touch the settings sensor buttons to exit Sabbath
mode.
The temperature will then appear on the display and
the interior lighting will come on (see “Selecting
further settings” – “Switching Sabbath mode on/off”).
To avoid overheating, the interior lighting switches
itself off automatically after approx. 15minutes if the
appliance door is left open. If this is not the cause,
there is a fault.
Risk of electric shock!
There are live electrical components under the
lighting cover.
The LED lighting may only be repaired or replaced
by Technical Service.
Risk of injury from LED lighting! The light
intensity corresponds to laser beam class 1/1M.
The lighting covers must not be removed or
damaged, or be removed due to damage. This
could cause injury to your eyes.
Do not look into the LED lighting (laser beam class
1/1M) with optical instruments (e.g., a magnifying
glass).
Contact Technical Service.