Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Pro zone
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Information for dealers
- Water connection
- Electrical connection
- Installation information
- Installation dimensions
- Limiting the opening angle of the appliance doors
- Changing the door hinges
- Building in the appliance
Frequently Asked Questions
73
Problem Possible cause and solution
The compressor runs
continuously.
This is not a fault. To save energy, the compressor
runs at a lower speed, but for longer, when less
cooling is required. In this way, the running time of
the compressor is extended.
An LED indicator light is
flashing at the back of
the refrigerator at the
bottom near the
compressor (depending
on model).
The electronic unit for
the compressor is
equipped with an
operation and fault
diagnosis LED indicator
light.
The indicator light flashes several times every
5seconds.
A fault has occurred.
Contact the Technical Service department.
The indicator light flashes regularly every
15seconds.
Not a fault. This flashing is normal.
The door seal is
damaged and needs to
be replaced.
No tools are required to change the door seal.
Contact Miele Service.
Ice or condensation has
built up inside the
appliance.
The door seal has come out of its groove.
Check that the door seal is correctly positioned in
the groove.
The door seal is damaged.
Check whether the door seal is damaged.