Operating and Installation Instructions

Cleaning and care
66
Dismantling the shelves / shelves
with lighting
 The stainless steel trim with LED
lighting must not be placed in water.
Clean the stainless steel trim with
LED lighting with a damp cloth.
 The stainless steel trim with LED
lighting and stainless steel trim on
the shelves is not suitable for
dishwashers.
Remove the trim before putting the
shelves in the dishwasher.
To remove the stainless steel trim and
the back protective strips, proceed as
follows:
 Place the shelf on a soft surface (e.g.
a dish towel) with the top side facing
downwards.
 The stainless steel trim with LED
lighting has metal discs (contacts) at
the front left corner which supply
power to the LED lighting.
These can be damaged when the
trim is removed.
Ensure that you always loosen the
other side from the contacts (metal
discs) first.
 Grasp the plastic surround on the
left-hand side of the stainless steel
trim at its furthest back point.
1. Pull the plastic surround from the
shelf and
2. pull the trim off at the same time.
Then do the same on the opposite
side.
3. Remove the protective strip.
 After cleaning, reattach the stainless
steel strip / the protective strip by
following the same procedure in
reverse.