Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Pro zone
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Information for dealers
- Water connection
- Electrical connection
- Installation information
- Installation dimensions
- Limiting the opening angle of the appliance doors
- Changing the door hinges
- Building in the appliance
Making ice cubes
60
By touching the or button, you
can now set the water volume you
require (E1 to E8):
E1: low
E8: high
Touch the OK button to confirm your
selection.
The selected setting will be saved.
Touch the settings button to exit
settings mode or
close the appliance door.
The electronics will otherwise switch to
normal operation after approx. one
minute.
Turning the ice cube maker on/
off with the on/off button
Open the ice cube drawer slightly.
Press the on/off button on the ice
cube maker
– until the indicator light comes on. The
symbol for the ice cube maker
will appear on the display. The ice
cube maker is now on.
– until the indicator light goes out. The
symbol for the ice cube maker
will disappear from the display. The
ice cube maker is now off.
Close the ice cube drawer.