Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Pro zone
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Information for dealers
- Water connection
- Electrical connection
- Installation information
- Installation dimensions
- Limiting the opening angle of the appliance doors
- Changing the door hinges
- Building in the appliance
Making ice cubes
58
The ice cube maker can be turned off
independently of the freezer if you do
not want to make any ice cubes.
If the ice cube maker is turned off, the
ice cube drawer can be used as an
extra drawer for freezing fresh food
and storing frozen food.
Turning the ice cube maker on/
off
Check that the ice cube drawer is
empty before turning the ice cube
maker on.
Touch the settings sensor button.
All symbols available for selection will
appear on the display and
thesymbol will flash.
Touch the sensor button for setting
the temperature ( or ) repeatedly
until the symbol for the ice cube
maker flashes on the display.
Touch the OK sensor button to
confirm the selection.
Touch the and sensor buttons to
make the settings for the ice cube
maker:
0: Ice cube maker is turned off
1: Ice cube maker is turned on
Touch the OK sensor button to
confirm the selection.
The selected setting is saved.
Touch the settings sensor button to
exit Settings mode or
close the appliance door.
The electronics will otherwise switch to
normal operation after approx. one
minute.