Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Pro zone
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Information for dealers
- Water connection
- Electrical connection
- Installation information
- Installation dimensions
- Limiting the opening angle of the appliance doors
- Changing the door hinges
- Building in the appliance
Adjusting the interior fittings
49
Adjusting the bottle rack
The bottle rack is available as an
optional accessory (see “Accessories -
Optional accessories”).
The bottle rack can be placed at
different positions in the appliance.
Lift the front of the rack and pull it
forwards slightly until the notch at the
side is in line with the shelf support. It
can then be raised or lowered to the
required level.
The stop bar at the back must point
upwards to prevent the bottles from
touching the back wall.
Stops prevent the bottle rack from
being dislodged by mistake.
PerfectFresh Pro zone drawers
The drawers in the PerfectFresh Pro
zone are on telescopic rails, and can be
removed for filling, emptying or cleaning
purposes:
To make it easier to pull out the
drawers, remove the bottle shelf from
the appliance door.
Pull the drawers out as far as they will
go.
Hold the sides of the drawers
towards the back, lift them slightly
and pull them out.
Push the runners back in again to
avoid damaging them.
Carefully pull out the lid between the
drawers slightly, and lift it down and
out.