Operating and Installation Instructions

Adjusting the interior fittings
48
Adjusting the door shelf/bottle
shelf
Danger of injury!
Only move the door shelves/bottle
shelves in the door when they are
empty.
 Push the door/bottle shelf upwards,
then remove it by pulling it forwards.
 Replace the shelf at the required
height. Ensure that it is securely
pushed back into position.
Adjusting the bottle holder
The bottle holder can be moved left or
right to create more room for drink
cartons.
The bottle holder can be removed
completely, for example for cleaning:
 Lift up the bottle shelf and pull it out.
 Detach the bottle holder from the
back edge of the bottle shelf.
Moving the shelf/shelf with
lighting
The shelves can be adjusted according
to the height of the food.
 Lift the shelf at the front, pull it
forwards slightly, lift the recess over
the shelf supports and move the shelf
up or down.
 Push in the shelf until it clicks into
position.
The stop at the back of the shelf must
face upwards so that food does not
touch the rear wall and freeze to it.
Stops prevent the shelves from being
dislodged by mistake.
Shelf with lighting
The LED lighting is located on the
stainless steel trim of the shelf. By
adjusting the position of the shelf in the
refrigerator section, you can change the
illumination in this section as required.