Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Pro zone
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Information for dealers
- Water connection
- Electrical connection
- Installation information
- Installation dimensions
- Limiting the opening angle of the appliance doors
- Changing the door hinges
- Building in the appliance
Selecting additional settings
38
By touching theor sensors you
can now select the following:
0: Sensor tone off; Door alarm off
1: Sensor tone off; Door alarm on
(after 4minutes)
2: Sensor tone off; Door alarm on
(after 2minutes)
3: Sensor tone on; Door alarm on
(after 2minutes).
Touch the OK sensor to confirm your
selection.
The selected setting will be adopted
and the symbol will flash.
Touch the settings sensor to leave the
settings mode.
Otherwise the appliance will exit the
settings mode automatically after
approximately one minute.
Display brightness
You can adjust the brightness of the
display to suit the ambient light
conditions in the room.
The display brightness can be adjusted
incrementally from1to3. The factory
default setting is 3(maximum
brightness).
Changing the brightness of the
display
Touch the settings sensor.
All symbols available for selection will
appear in the display and the
symbol flashes.
Touch the sensors for setting the
temperature ( or ) repeatedly until
the symbol flashes in the display.
Touch the OK sensor to confirm your
selection.
The last selected setting flashes and
the symbol lights up in the display.