Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Pro zone
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Information for dealers
- Water connection
- Electrical connection
- Installation information
- Installation dimensions
- Limiting the opening angle of the appliance doors
- Changing the door hinges
- Building in the appliance
Selecting additional settings
37
You can now select °F by touching
the or button.
Touch the OK button to confirm your
selection.
The selected setting will be saved.
Touch the settings button to exit
settings mode.
If you do not, the appliance will exit
settings mode automatically after
approximately one minute.
The temperature will now be displayed
in Fahrenheit.
Acoustic signals
The appliance has acoustic signals
such as the button tone and the door
and temperature alarms.
You can turn the button tone and the
door alarm on and off, but you cannot
turn off the temperature alarm.
There are four settings to choose from.
Option3is set at the factory; this
means that the button tone and the
door alarm are turned on.
Turning acoustic tones on or off
Touch the settings sensor.
All symbols available for selection will
appear in the display and the
symbol flashes.
Touch the sensors for setting the
temperature ( or ) repeatedly until
the symbol flashes in the display.
Touch the OK sensor to confirm your
selection.
The last selected setting flashes and
the symbol lights up in the display.