Operating and Installation Instructions

Temperature and door alarm
32
Your appliance is equipped with a
warning system to ensure that
temperature increases in the freezer
section do not go unnoticed and also
prevents energy from being wasted
when a door is left open.
Temperature alarm
If the freezer temperature gets too high,
the freezer section sensor will flash and
the alarm symbol  on the display will
flash, and an alarm will also sound.
The temperature the appliance is set at
determines the temperature the
appliance recognizes as being too
warm.
The audible and visual signals are, for
example, triggered:
– when the appliance is switched on if
the temperature in the appliance
differs too much from the set
temperature,
– if a lot of warm ambient air enters the
freezer when food is arranged or
removed,
– when you freeze large amounts of
food at once,
– when you freeze fresh food that is still
warm,
– after a power outage,
– if the appliance has a fault.
The alarm will stop and the alarm
symbol  go out as soon as the
temperature reaches the correct level
again. The light in the freezer section
button is then constant again.
 If the temperature in the freezer
remains above 0°F (-18°C) for a long
time, check that the frozen food has
not started to defrost.
If it has, check that the food is safe
to use and if it is, then use it as soon
as possible or cook it before freezing
it again.
Cancelling the temperature alarm
If the alarm is disturbing you, it can be
switched off.
 Touch the button to turn off the
temperature alarm.
The alarm will stop.
The alarm symbol will remain on
until the set temperature has been
reached.