Operating and Installation Instructions

The correct temperature
27
The following information appears on
the display when the sensors are
touched:
– With the first touch: The last
temperature set flashes.
– Each subsequent touch of the
sensor: The temperature changes in
1° increments.
– Keeping your finger on the sensor
changes the temperature
continuously.
Approx. 5seconds after you release the
button, the actual temperature in the
appliance will be displayed.
or
 Touch the OK button to confirm your
selection.
If you have adjusted the temperature,
wait for approx. 6hours if the
appliance is not very full and for
approx. 24hours if the appliance is
full before checking the temperature
display, as it will take this long for the
appliance to give an accurate reading.
 If, after this amount of time, the
temperature is too high or too low,
adjust it again.
Temperature range
The temperature can be selected within
the following ranges:
– from 37°F (3°C) to 49°F (9°C) in the
refrigerator section.
– from 7°F (-14°C) to -15°F (-26°C) in
the freezer section.