Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Pro zone
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Information for dealers
- Water connection
- Electrical connection
- Installation information
- Installation dimensions
- Limiting the opening angle of the appliance doors
- Changing the door hinges
- Building in the appliance
Building in the appliance
117
The appliance is properly installed in
the niche if:
– The doors close properly.
– The doors are not sitting against the
cabinet carcase.
– The seal on the top corner of the
handle side is firmly seated.
To check this, place a lamp that is
switched on inside the appliance and
close the appliance doors.
Make the room dark and then check
whether you can see light shining out
from the sides of the appliance. If so,
go back and check the individual
installation steps.