Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Pro zone
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Information for dealers
- Water connection
- Electrical connection
- Installation information
- Installation dimensions
- Limiting the opening angle of the appliance doors
- Changing the door hinges
- Building in the appliance
Building in the appliance
116
Pre-drill fixing holes in the cabinet
door and fasten screws. Make sure
both metal edges are flush
(//symbol).
Close the appliance door and the
cabinet door.
- Adjusting the depth (Z)
Loosen screws at the top of the
appliance door and screw at the
bottom of the securing bracket. Push
on the appliance door until there is a
gap of 1/16" (2mm) between the
cabinet door and the cabinet carcase.
Tighten all the screws again.
Replace upper cover and click it
into place.
Push up side covers so that they
audibly click into place.