Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Pro zone
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Information for dealers
- Water connection
- Electrical connection
- Installation information
- Installation dimensions
- Limiting the opening angle of the appliance doors
- Changing the door hinges
- Building in the appliance
Building in the appliance
113
Tip: Push installation aids to the
height of the adjacent cabinet doors
with the cabinet front.
Unscrew nuts and remove
mounting frame together with
installation aids .
Place the cabinet door with the outer
side downwards on a stable surface.
Draw a faint central line with a pencil
on the inside of cabinet door.
Hang mounting frame with the
installation aids on the inside of the
cabinet door. Align the mounting
frame centrally.
Secure the mounting frame with at
least 6short fixing plate screws.
(for cassette doors use only 4screws
at the edge). Pre-drill the holes in the
cabinet door if necessary.
Pull the installation aids upwards and
out.
Turn the installation aids and push
them all the way into the middle slot
of the mounting frame for safe
keeping.