Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Pro zone
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Information for dealers
- Water connection
- Electrical connection
- Installation information
- Installation dimensions
- Limiting the opening angle of the appliance doors
- Changing the door hinges
- Building in the appliance
Building in the appliance
112
To give the appliance additional security
in the niche push the batons supplied
between the appliance and the cabinet
base:
First secure handle to one of the
batons.
Guide it into the channel as far as it
will go. Now remove the handle,
place it on the other baton and guide
this in too.
Important! Keep the handle in case
you want to move the appliance at a
later date.
Close the appliance doors.
Fitting the cabinet doors
An installation set or an extra pair of
securing brackets is available from
Miele Service or from specialist
retailers for the installation of large
and divided cabinet doors.
Complete the following steps on both
doors.
The distance between the appliance
door and the mounting frame is set to
5/16" (8mm). Check this distance
and adjust it if necessary.
Push the installation aids to the
height of the cabinet: the lower
contact edge X of the installation aids
must be at the same height as the
upper edge of the cabinet door to be
fitted (symbol).