Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Pro zone
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Information for dealers
- Water connection
- Electrical connection
- Installation information
- Installation dimensions
- Limiting the opening angle of the appliance doors
- Changing the door hinges
- Building in the appliance
Building in the appliance
111
Push the loose securing bracket
against the cabinet wall.
Fix securing bracket to the cabinet
wall with screw. Pre-drill the hole
in the cabinet wall if necessary.
Fix securing bracket to the cabinet
wall with screws. Pre-drill the holes
in the cabinet wall if necessary.
Caution! Press the protruding
bracket against the cabinet wall with
your thumbs while tightening the
screws. The appliance must not shift
backwards.
Now tighten screws and again.
Snap off any protruding ends from
the securing bracket. They are no
longer required and can be disposed
of.
Place relevant covers and on
the securing bracket.