Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Pro zone
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Information for dealers
- Water connection
- Electrical connection
- Installation information
- Installation dimensions
- Limiting the opening angle of the appliance doors
- Changing the door hinges
- Building in the appliance
Changing the door hinges
103
Unscrew the soft-close mechanism
The soft-close mechanism folds
in when dismantled.
Place the door with the front facing
down on a stable surface.
Remove the soft-close mechanism
from the ball joint.
Unscrew the mount and pull the
soft-close mechanism towards you
and off.
Using a screwdriver, remove the ball
joint and screw it into the adjacent
hole.
Now turn over the appliance door so
that outer side faces upwards (hinges
remain open).
Do not close the hinges.
Remove the screws .
Place each hinge in the corner
diagonally opposite its original
position .