Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Pro zone
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Information for dealers
- Water connection
- Electrical connection
- Installation information
- Installation dimensions
- Limiting the opening angle of the appliance doors
- Changing the door hinges
- Building in the appliance
Changing the door hinges
102
Danger of injury! The hinges can
snap closed.
Leave them open.
Slightly loosen the hinge screws
and.
Push the appliance doors and
outward and take them off.
Undo the screws completely.
Fit the bracket on the opposite
side and attach the screws
loosely.
Undo the screws completely and
loosely screw them in on the opposite
side.
If you have inserted pins into the
hinges to limit the opening angle of
the door:
Lift the pins up and out of the hinges.
Carry out the following steps for each
door.