Operating And Installation Guide 1

Installation
*INSTALLATION*
98
 Using a screwdriver, remove the ball
joint  and screw it into the adjacent
hole.
 Now turn over the appliance door so
that outer side faces upwards (hinges
remain open).
Do not close the hinges.
 Remove the screws .
 Place each hinge in the corner
diagonally opposite its original
position .
Fastening the soft-close mechanism
 Now turn over the appliance door so
that the outer side faces downwards.
 Screw the mount  onto the hinge
and firmly tighten.
 Pull the soft-close mechanism  so
that it extends, and hook it onto the
ball joint.