Operating And Installation Guide 1

Installation
*INSTALLATION*
97
 Undo the screws completely.
 Fit the bracket on the opposite
side and attach the screws
loosely.
 Undo the screws completely and
loosely screw them in on the opposite
side.
 If you have inserted pins into the
hinges to limit the opening angle of
the door:
Lift the pins up and out of the hinges.
Carry out the following steps for each
door.
Unscrew the soft-close mechanism
 The soft-close mechanism folds
in when dismantled.
 Place the door with the front facing
down on a stable surface.
 Remove the soft-close mechanism 
from the ball joint.
 Unscrew the mount  and pull the
soft-close mechanism  towards you
and off.