Operating And Installation Guide 1
Installation
*INSTALLATION*
114
The stainless steel hose supplied is
4' 11" (1.5 m)m long.
Water supply
Ensure that the connections are tight
and leak-proof.
Risk of damage to the stainless
steel hose.
The water supply from the faucet to
the ice cube maker has been
interrupted.
Do not bend or damage the stainless
steel hose.
Before establishing the fresh water
connection, ensure that the
appliance is disconnected from the
power supply.
The fresh water connection is at the
back of the appliance, at the bottom.
The connection parts included with the
appliance permit the connection of
various water lines (water line not
supplied). Do not connect old water
lines that have been used before.
The solenoid valve has a metric
R3/4 connection thread.
Remove the cap from the solenoid
valve.
Insert the adapter into the union
nut.
Risk of damage!
Do not insert the water filter the
wrong way around, as this can cause
damage.
Insert the water filter with the
depression facing downward toward
the adapter.