Manual

Cleaning and care
60
WARNING! Danger of electric
shock!
Unplug the appliance or trip the
circuit breaker.
Fire hazard!
Do not damage the coolant
pipework.
Do not let water get into the
electronic unit or the lighting.
Steam from a steam cleaning
appliance could reach the electrical
components and cause a short
circuit.
Do not use a steam cleaner!
Cleaning water must not get into the
drain hole.
The data plate located inside the
appliance must not be removed. It
contains information which is required
in the event of a service call.
Cleaning agents
Cleaning and conditioning agents
used inside the appliance must be
food safe.
To avoid damaging the surfaces of your
appliance, avoid the following:
cleaning products containing soda,
ammonia, acid, or chloride;
lime scale removers;
abrasive cleaning products such as
scouring powder, scouring liquid, or
pumice stones;
cleaners containing solvents;
stainless steel cleaners;
dishwasher cleaners;
oven sprays;
glass cleaner;
hard, abrasive sponges and brushes
such as pot scrubbers;
eraser sponges;
sharp metal scrapers.
Glass cleaners may be used to
clean the exterior.
However do not allow them to sit or
"puddle", this can cause damage to
the surface.
Remove the cleaner promptly.
To clean the appliance's stainless
steel surfaces, use Miele Stainless
Steel Cleaner (see "Guide to the
appliance - Optional accessories").
This product contains substances that
are gentle on stainless steel surfaces
and, unlike stainless steel cleaners, it
does not contain polishing agents.
Miele Stainless Steel Cleaner removes
dirt gently and forms a protective film
against dirt and water each time it is
used.
We recommend using warm water and
liquid dish soap.
The following pages contain important
information on cleaning.