Manual

Selecting additional settings
37
 By touching theor sensors you
can now select the following:
0: Sensor tone off; Door alarm off
1: Sensor tone off; Door alarm on
(after 4minutes)
2: Sensor tone off; Door alarm on
(after 2minutes)
3: Sensor tone on; Door alarm on
(after 2minutes).
 Touch the OK sensor to confirm your
selection.
The selected setting will be adopted
and the symbol will flash.
 Touch the settings sensor to leave the
settings mode.
Otherwise the appliance will exit the
settings mode automatically after
approximately one minute.
Display brightness
You can adjust the brightness of the
display to suit the ambient light
conditions in the room.
The display brightness can be adjusted
incrementally from1to3. The factory
default setting is 3(maximum
brightness).
Changing the brightness of the
display
 Touch the settings sensor.
All symbols available for selection will
appear in the display and the 
symbol flashes.
 Touch the sensors for setting the
temperature ( or ) repeatedly until
the symbol flashes in the display.
 Touch the OK sensor to confirm your
selection.
The last selected setting flashes and
the  symbol lights up in the display.