Manual

Building in the appliance
106
Fitting the appliance
 Now push the appliance into the
niche until all securing brackets make
contact with the front edge of the
cabinet side wall.
– For 5/8" (16mm)-thick cabinet
walls:
The spacers make contact with the
top and bottom of the front edge of
the cabinet side walls.
– For 3/4" (19mm)-thick cabinet
walls:
The front edges of the top and
bottom hinges are flush with the front
edge of the cabinet side walls.
 Check again that securing brackets at
the top and bottom are flush with
front edge of the cabinet side wall.
This ensures a distance of 1
5/8" (42mm) to the front edges of the
cabinet side walls all the way round.
For units with door contact
components (such as nubs, sealing
lips etc.), you must take account of
the dimensions of the door contact
components to maintain a distance of
1 5/8" (42mm) all the way round.
 Pull the appliance forward by the
required amount.
The hinges and covers will now be
positioned correctly.
Tip: Remove the door contact
components. The door will be flush with
the surrounding cabinet doors.
 Using the wrench supplied, adjust
the adjustable feet at each side of the
appliance so that it stands upright.
The door may not close properly if a
distance of 1 5/8" (42mm) (between
the body of the appliance and the
front of the cabinet side walls) is not
maintained all the way round.
This can cause the formation of ice
or condensation and other problems
that can result in increased energy
consumption.