Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment 2
- Guide to the appliance 6
- Warning and Safety instructions 10
- How to save energy 19
- Switching the appliance on and off 21
- The correct temperature 25
- Using SuperCool and SuperFreeze 29
- Temperature and door alarm 32
- Further settings 34
- Using the refrigerator efficiently 39
- Storing food in the PerfectFresh Pro zone 41
- Adjusting the interior fittings 45
- Freezing and storing food 48
- Making ice cubes 52
- Automatic defrosting 56
- Cleaning and care 57
- Problem solving guide 65
- Noises 77
- After Sales / Warranty 78
- Information for Miele Centers and Chartered Agents 79
- Mains water connection 81
- Electrical connection 84
- Installation advice 85
- Building-in dimensions 88
- Adjusting the door hinges 89
- Changing the door hinging 90
- Installation 94
- Contact details 107
Securing the appliance in the
niche
^ Press the appliance against the wall
on the hinge side.
^
Screw the chipboard screws s
through the hinge plates at the top,
bottom and then in the middle to
secure the appliance to the housing
unit.
^ Push the loose-fitting fixing bracket
against the side wall.
^ Screw the fixing bracket j to the
housing unit side wall with the screw
s. Pre-drill the hole in the housing
unit if necessary.
^
Secure the fixing bracket g to the
housing unit using the screws t.
Pre-drill the holes in the housing unit
if necessary.
Important! Push the bracket against
the wall of the housing unit while you
are tightening the screws. Ensure the
appliance does not slide backwards.
^
Then tighten the screws h and k.
Installation
99