Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment 2
- Guide to the appliance 6
- Warning and Safety instructions 10
- How to save energy 19
- Switching the appliance on and off 21
- The correct temperature 25
- Using SuperCool and SuperFreeze 29
- Temperature and door alarm 32
- Further settings 34
- Using the refrigerator efficiently 39
- Storing food in the PerfectFresh Pro zone 41
- Adjusting the interior fittings 45
- Freezing and storing food 48
- Making ice cubes 52
- Automatic defrosting 56
- Cleaning and care 57
- Problem solving guide 65
- Noises 77
- After Sales / Warranty 78
- Information for Miele Centers and Chartered Agents 79
- Mains water connection 81
- Electrical connection 84
- Installation advice 85
- Building-in dimensions 88
- Adjusting the door hinges 89
- Changing the door hinging 90
- Installation 94
- Contact details 107
^
Screw the fixing bracket d into the
pre-drilled holes in the appliance
door using the hexagonal screw e.
Securely screw the second pair of
fixing brackets d to the handle area
of the door. To do this, use the pre-
drilled holes in the appliance door.
^
Push the appliance two-thirds of the
way into its niche.
When doing this, make sure that the
mains cable does not get trapped.
Installation tip:
Tie a piece of string around the plug to
"lengthen" the mains cable.
Then grab the other end of the string
and pull the mains cable through the
housing unit to make it easier to
connect the appliance to the electricity
supply after installation.
With 16 mm thick unit walls:
^
Clip the spacers b and c on the
right-hand side of the hinges.
^
Open both appliance doors.
Installation
96