Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment 2
- Guide to the appliance 6
- Warning and Safety instructions 10
- How to save energy 19
- Switching the appliance on and off 21
- The correct temperature 25
- Using SuperCool and SuperFreeze 29
- Temperature and door alarm 32
- Further settings 34
- Using the refrigerator efficiently 39
- Storing food in the PerfectFresh Pro zone 41
- Adjusting the interior fittings 45
- Freezing and storing food 48
- Making ice cubes 52
- Automatic defrosting 56
- Cleaning and care 57
- Problem solving guide 65
- Noises 77
- After Sales / Warranty 78
- Information for Miele Centers and Chartered Agents 79
- Mains water connection 81
- Electrical connection 84
- Installation advice 85
- Building-in dimensions 88
- Adjusting the door hinges 89
- Changing the door hinging 90
- Installation 94
- Contact details 107
Before installation
^
Before installation, remove the
accessories bag containing
installation components and
accessories from the appliance, and
remove the sealing strip from the
appliance door.
^
Do not remove the following from the
rear of the appliance:
– The spacers (depending on model).
These ensure the gap required
between the back of the appliance
and the wall is maintained.
– The bags (depending on model)
located inside the metal grille (heat
exchanger).
These are important for the correct
functioning of the appliance. Their
contents are non-toxic and are not
dangerous.
^
Remove any cable clips from the
back of the appliance.
^
Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
^
Open the appliance door and remove
the red transport clips a (depending
on model).
Installation advice
87