Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment 2
- Guide to the appliance 6
- Warning and Safety instructions 10
- How to save energy 19
- Switching the appliance on and off 21
- The correct temperature 25
- Using SuperCool and SuperFreeze 29
- Temperature and door alarm 32
- Further settings 34
- Using the refrigerator efficiently 39
- Storing food in the PerfectFresh Pro zone 41
- Adjusting the interior fittings 45
- Freezing and storing food 48
- Making ice cubes 52
- Automatic defrosting 56
- Cleaning and care 57
- Problem solving guide 65
- Noises 77
- After Sales / Warranty 78
- Information for Miele Centers and Chartered Agents 79
- Mains water connection 81
- Electrical connection 84
- Installation advice 85
- Building-in dimensions 88
- Adjusting the door hinges 89
- Changing the door hinging 90
- Installation 94
- Contact details 107
Demo mode r
This appliance can be presented in
Miele Centers and retail stores with the
help of the "Demo mode". The controls
and lighting will work, but the
compressor will not operate.
Switching on Demo mode
^
Switch the appliance off by touching
the On/Off sensor.
If this is not possible, the safety lock
is active.
The temperature display and the mains
connection symbol t light up.
^
Place your finger on the X sensor,
and leave it there.
^
At the same time, briefly touch the
On/Off sensor (without letting go of
the X sensor).
^ Keep your finger on the X sensor
until the r symbol appears in the
display.
^ Then take your finger off the X
sensor.
Demo mode is switched on and the r
symbol lights up in the display.
Information for Miele Centers and Chartered Agents
79