Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment 2
- Guide to the appliance 6
- Warning and Safety instructions 10
- How to save energy 19
- Switching the appliance on and off 21
- The correct temperature 25
- Using SuperCool and SuperFreeze 29
- Temperature and door alarm 32
- Further settings 34
- Using the refrigerator efficiently 39
- Storing food in the PerfectFresh Pro zone 41
- Adjusting the interior fittings 45
- Freezing and storing food 48
- Making ice cubes 52
- Automatic defrosting 56
- Cleaning and care 57
- Problem solving guide 65
- Noises 77
- After Sales / Warranty 78
- Information for Miele Centers and Chartered Agents 79
- Mains water connection 81
- Electrical connection 84
- Installation advice 85
- Building-in dimensions 88
- Adjusting the door hinges 89
- Changing the door hinging 90
- Installation 94
- Contact details 107
Problems with the ice cube maker
Problem Possible cause Remedy
You cannot switch
the ice cube maker
on.
The appliance is not
connected to the power
supply or is not switched
on.
^
Reconnect the appliance
to the electricity supply
and switch it on.
The ice cube maker
is not producing
any ice cubes.
The appliance or the ice
cube maker is not switched
on.
^
Switch the appliance and
the ice cube maker on.
The water inlet is not open.
^
Open the water inlet.
The drawer of the ice cube
maker is not closed
properly.
^
Push the drawer all the
way in.
The ice cube tray is not
positioned correctly.
^ Correct the position of the
ice cube tray.
The temperature in the
freezer section is too high.
^ Select a lower
temperature.
The ® symbol
flashes and the
indicator light on
the ice cube maker
flashes when the
ice cube maker is
switched on.
The water inlet is not open.
^ Open the water inlet.
The ® and ;
symbols flash. The
indicator light on
the ice cube maker
also flashes.
The is a fault with the ice
cube maker.
^
Call Miele.
Problem solving guide
75