Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment 2
- Guide to the appliance 6
- Warning and Safety instructions 10
- How to save energy 19
- Switching the appliance on and off 21
- The correct temperature 25
- Using SuperCool and SuperFreeze 29
- Temperature and door alarm 32
- Further settings 34
- Using the refrigerator efficiently 39
- Storing food in the PerfectFresh Pro zone 41
- Adjusting the interior fittings 45
- Freezing and storing food 48
- Making ice cubes 52
- Automatic defrosting 56
- Cleaning and care 57
- Problem solving guide 65
- Noises 77
- After Sales / Warranty 78
- Information for Miele Centers and Chartered Agents 79
- Mains water connection 81
- Electrical connection 84
- Installation advice 85
- Building-in dimensions 88
- Adjusting the door hinges 89
- Changing the door hinging 90
- Installation 94
- Contact details 107
Other problems
Problem Possible cause Remedy
Food has frozen
together.
The food packaging was
not dry when loaded in the
freezer.
^
Use a blunt instrument,
e.g. a spoon handle or
plastic scraper, to prise it
apart carefully.
An alarm does not
sound although the
appliance door has
been left open for
some time.
This is not a fault. The alarm
tone was switched off in
settings mode (see "Further
settings - Audible tones").
None.
You cannot switch
the appliance off.
The safety lock is switched
on. The 0 symbol lights up.
^
Switch the safety lock off
(see "Settings - Switching
the safety lock on/off").
The external walls
of the appliance feel
warm.
This is not a fault. The heat
which results from the
cooling process is used to
avoid the build-up of
condensation on the
appliance.
None.
The floor of the
refrigerator section
is wet.
The condensate drain hole
is blocked.
^ Clean the condensate
channel and drain hole.
Problem solving guide
74