Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment 2
- Guide to the appliance 6
- Warning and Safety instructions 10
- How to save energy 19
- Switching the appliance on and off 21
- The correct temperature 25
- Using SuperCool and SuperFreeze 29
- Temperature and door alarm 32
- Further settings 34
- Using the refrigerator efficiently 39
- Storing food in the PerfectFresh Pro zone 41
- Adjusting the interior fittings 45
- Freezing and storing food 48
- Making ice cubes 52
- Automatic defrosting 56
- Cleaning and care 57
- Problem solving guide 65
- Noises 77
- After Sales / Warranty 78
- Information for Miele Centers and Chartered Agents 79
- Mains water connection 81
- Electrical connection 84
- Installation advice 85
- Building-in dimensions 88
- Adjusting the door hinges 89
- Changing the door hinging 90
- Installation 94
- Contact details 107
Interior lighting
Problem Possible cause Remedy
The LED lighting for
the PerfectFresh
Pro zone does not
work.
To avoid overheating, the
lighting switches itself off
automatically after approx.
15 minutes if the door is left
open.
^
Close the appliance door.
When the door is reopened,
the interior lighting will work
again.
If this is not the case, then
there is a fault.
^
Call Miele.
The LED lighting may only
be repaired or changed by
a Miele authorised service
technician. Current-carrying
components are located
underneath the light cover.
Danger of injury and
damage!
The light cover must not
be removed. If the cover
is damaged or has
inadvertently been
removed due to damage,
be careful not to look
directly at the light with
optical instruments (e.g.
magnifying glass) as it
may damage your eyes.
Problem solving guide
73