Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment 2
- Guide to the appliance 6
- Warning and Safety instructions 10
- How to save energy 19
- Switching the appliance on and off 21
- The correct temperature 25
- Using SuperCool and SuperFreeze 29
- Temperature and door alarm 32
- Further settings 34
- Using the refrigerator efficiently 39
- Storing food in the PerfectFresh Pro zone 41
- Adjusting the interior fittings 45
- Freezing and storing food 48
- Making ice cubes 52
- Automatic defrosting 56
- Cleaning and care 57
- Problem solving guide 65
- Noises 77
- After Sales / Warranty 78
- Information for Miele Centers and Chartered Agents 79
- Mains water connection 81
- Electrical connection 84
- Installation advice 85
- Building-in dimensions 88
- Adjusting the door hinges 89
- Changing the door hinging 90
- Installation 94
- Contact details 107
Interior lighting
Problem Possible cause Remedy
The LED lighting on
one of the
adjustable shelves
does not work.
The adjustable shelf is not
sitting correctly in the
support ribs.
^
Push in the shelf until it
clicks into position.
The LED lighting on
the adjustable
shelves does not
work.
Liquid has come into
contact with the LED
lighting on a shelf or the
metal discs (contacts) in the
left-hand support ribs.
A safety cut-out switches
the interior lighting off.
^
Wipe the stainless steel
strip with LED lighting with
a damp cloth and dry it
with a soft cloth, or let it
dry outside the appliance.
Clean the metal discs
(contacts) in the same
way.
Ensure that the contacts are
clean and dry before
refitting the shelves with
LED lighting
^ Push in the shelf until it
clicks into position.
^ Close the appliance door.
When the door is reopened,
the interior lighting will work
again.
If this is not the case, then
there is a fault.
^
Call Miele.
Problem solving guide
72