Operating and Installation Instructions

^
Remove any soiling on stainless steel
strips and fascias with the Miele care
product for stainless steel.
^
Always apply this care product after
cleaning to protect stainless steel
surfaces and prevent resoiling.
^
Leave the doors open to air the
appliance for a short while.
Door seals
Do not use any oils or grease on the
door seals as these will cause the
seals to deteriorate and become
porous over time.
^ The door seals should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
Ventilation gaps
^ The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build-up
of dust will increase the energy
consumption of the appliance.
After cleaning
^
Refit all shelves and accessories in
the appliance.
The left-hand support ribs for the
adjustable shelves have metal discs
(contacts) inside the receiving gaps
to supply the LED lighting with
electricity.
Ensure these contacts are clean and
dry before inserting the adjustable
shelf with lighting. The adjustable
shelf must click into position for the
lighting to work.
^ Reconnect the appliance to the
electricity supply and switch it on.
^ Switch on the SuperFreeze function
so that the freezer section can cool
down quickly.
^ Switch on the SuperCool function so
that the refrigerator section can cool
down quickly.
^ Place food in the refrigerator section
and close the door.
^
Once the freezer section has
reached the required temperature,
place the food back in the freezer
drawers and replace them in the
freezer section.
^
Switch off SuperFreeze by touching
the SuperFreeze sensor when the
temperature in the freezer is a
constant -18 °C or colder.
Cleaning and care
64