Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment 2
- Guide to the appliance 6
- Warning and Safety instructions 10
- How to save energy 19
- Switching the appliance on and off 21
- The correct temperature 25
- Using SuperCool and SuperFreeze 29
- Temperature and door alarm 32
- Further settings 34
- Using the refrigerator efficiently 39
- Storing food in the PerfectFresh Pro zone 41
- Adjusting the interior fittings 45
- Freezing and storing food 48
- Making ice cubes 52
- Automatic defrosting 56
- Cleaning and care 57
- Problem solving guide 65
- Noises 77
- After Sales / Warranty 78
- Information for Miele Centers and Chartered Agents 79
- Mains water connection 81
- Electrical connection 84
- Installation advice 85
- Building-in dimensions 88
- Adjusting the door hinges 89
- Changing the door hinging 90
- Installation 94
- Contact details 107
^
Touch the settings sensor.
All selectable symbols appear in the
display and the 0 flashes.
^
Touch the sensors for setting the
temperature (X or Y) repeatedly until
the symbol for the ice cube maker ®
flashes in the display.
^
Touch the OK sensor to confirm your
selection.
^ The required setting can be selected
by touching the X and Y sensors:
0: Ice cube maker is switched off
1: Ice cube maker is switched on
2: Set the water quantity
3: Set cleaning position for the
ice cube tray
4: Rinse the ice cube maker
^ Touch the OK sensor to confirm your
selection.
The selected setting is saved and you
will hear the ice cube tray moving into a
slanted position.
^
Wait until the ice cube tray has
completed this rotation before
continuing.
The ice cube maker will then switch off.
The symbol for the ice cube maker ®
will disappear from the display.
^
Remove and clean the ice cube
drawer.
The ice cube tray is not removable
and can only be cleaned when in
place.
^ Clean the ice cube tray b.
As soon as the ice cube maker is
switched on the ice cube tray rotates
back to its original position.
Cleaning and care
60