Operating and Installation Instructions

^
Touch the OK sensor to confirm your
selection.
The selected setting will be saved. The
ice cube maker symbol ® will flash in
the display and the indicator light will
flash on the ice cube maker as long as
the ice cube maker is being rinsed.
You will hear the ice cube tray turning
to a slanted position.
^
Wait until the ice cube tray has
completed this rotation before
continuing.
Then ice cube maker will then switch
off.
^ Carefully remove the ice cube drawer
which is now filled with water. Then
empty and clean it.
The ice cube tray is not removable
and can only be cleaned when in
place.
^ Dry the ice cube tray b with a soft
cloth.
As soon as the ice cube maker is
switched on the ice cube tray rotates
back to its original position.
Cleaning the ice cube tray
Clean the ice cube maker:
– before switching off the ice cube
maker for an extended period of
time.
– regularly to remove any ice and
water residues.
If you have already selected the
setting "Rinse the ice cube maker"
(see "Rinsing the ice cube maker"),
the ice cube tray will already be in
the cleaning position.
The ice cube tray b is not removable
and can only be cleaned when in
place. You can therefore place the ice
cube tray in the cleaning position.
Setting the cleaning position
The setting can only be selected if
the ice cube maker is switched on.
^
Empty the ice cube drawer.
Cleaning and care
59