Operating and Installation Instructions

Do not let water get into the
electronic unit or the lighting, or on
the metal discs (contacts) in the left-
hand shelf support.
Cleaning water must not get into the
drain hole.
Do not use a steam cleaning
apparatus to clean the appliance.
Steam could reach the electrical
components and cause a short
circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service call.
Cleaning agents
To avoid damaging the outer surfaces
of your appliance, do not use:
–
cleaning agents containing soda,
ammonia, acids or chlorides,
–
cleaning agents containing
descaling agents,
–
abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
–
solvent-based cleaning agents,
–
stainless steel cleaning agents,
–
dishwasher cleaner,
–
oven sprays,
–
glass cleaning agents,
–
hard, abrasive sponges and
brushes, e.g. pot scourers,
–
dirt erasers,
–
sharp metal scrapers.
To clean stainless steel surfaces on
the appliance, use the Original Miele
care product for stainless steel (see
Guide to the appliance - Optional
accessories").
This product contains substances
that are gentle to stainless steel
surfaces and, unlike stainless steel
cleaners, it does not contain
polishing agents. Soiling is gently
removed and each time the Original
Miele Care product for stainless steel
is used, it forms a protective film
against dirt and water.
Cleaning and conditioning agents
used inside the appliance must be
food safe.
We recommend using lukewarm water
with a little washing-up liquid to clean
surfaces of the appliance.
The following pages contain
important information on cleaning.
Cleaning and care
57