Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment 2
- Guide to the appliance 6
- Warning and Safety instructions 10
- How to save energy 19
- Switching the appliance on and off 21
- The correct temperature 25
- Using SuperCool and SuperFreeze 29
- Temperature and door alarm 32
- Further settings 34
- Using the refrigerator efficiently 39
- Storing food in the PerfectFresh Pro zone 41
- Adjusting the interior fittings 45
- Freezing and storing food 48
- Making ice cubes 52
- Automatic defrosting 56
- Cleaning and care 57
- Problem solving guide 65
- Noises 77
- After Sales / Warranty 78
- Information for Miele Centers and Chartered Agents 79
- Mains water connection 81
- Electrical connection 84
- Installation advice 85
- Building-in dimensions 88
- Adjusting the door hinges 89
- Changing the door hinging 90
- Installation 94
- Contact details 107
Refrigerator section and
PerfectFresh Pro zone
The refrigerator section and the
PerfectFresh Pro zone defrost
automatically.
Condensate and frost can build up on
the back wall of the refrigerator section
and the PerfectFresh Pro zone whilst in
use. You do not need to remove this, as
it will defrost and evaporate
automatically with the warmth
generated by the appliance.
The condensate is drained away
through a channel and drain hole, then
fed into an evaporation system at the
back of the appliance.
It is important to keep the
condensate channel and drain hole
clean and free of blockages so that
the condensate can flow away
properly.
Freezer section
This freezer is equipped with a
"NoFrost" system. The freezer defrosts
automatically.
The moisture generated by defrosting
collects in the condenser and is
automatically dissipated by the
condenser from time to time.
This automatic defrosting system
enables the freezer to remain
permanently ice-free. Food stored in
the freezer will not defrost.
Automatic defrosting
56