Operating and Installation Instructions

Switching the ice cube maker
on/off
^
Touch the settings sensor.
All selectable symbols appear in the
display and the 0 flashes.
^
Touch the sensors for setting the
temperature (X or Y) repeatedly until
the symbol for the ice cube maker ®
flashes in the display.
^ Touch the OK sensor to confirm your
selection.
^ Use the X and Y sensors to set the
ice cube maker:
0: Ice cube maker is switched off
1: Ice cube maker is switched on
^ Touch the OK sensor to confirm your
selection.
The selected setting will be adopted.
^
Touch the settings sensor to leave
settings mode,
or
^
close the appliance door.
The electronics will otherwise switch to
normal operation after one minute.
The drawer must be completely shut
for ice cubes to be produced.
After the appliance is switched on for
the first time it can take up to
24 hours for the first ice cubes to
drop out of the ice cube maker and
collect in the drawer.
Thereafter, when the ice cube maker
is switched off and then on again it
will take up to a maximum of 6 hours
for ice cubes to be produced.
The ice cube maker can be switched
off independently of the freezer
section if you do not want the
appliance to make any ice cubes.
If the ice cube maker is switched off,
the ice cube drawer can be used as
an extra drawer for freezing fresh
food and storing frozen food.
Making a large quantity of ice cubes
The number of ice cubes which the
appliance makes depends on the
temperature in the freezer. The lower
the temperature, the more ice cubes
are produced within a certain time
frame. At a temperature of -18 °C,
approx. 1 kg of ice is produced within a
24-hour period.
Ice cube production is halted
automatically as soon as the ice cube
container is full.
Making ice cubes
53