Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment 2
- Guide to the appliance 6
- Warning and Safety instructions 10
- How to save energy 19
- Switching the appliance on and off 21
- The correct temperature 25
- Using SuperCool and SuperFreeze 29
- Temperature and door alarm 32
- Further settings 34
- Using the refrigerator efficiently 39
- Storing food in the PerfectFresh Pro zone 41
- Adjusting the interior fittings 45
- Freezing and storing food 48
- Making ice cubes 52
- Automatic defrosting 56
- Cleaning and care 57
- Problem solving guide 65
- Noises 77
- After Sales / Warranty 78
- Information for Miele Centers and Chartered Agents 79
- Mains water connection 81
- Electrical connection 84
- Installation advice 85
- Building-in dimensions 88
- Adjusting the door hinges 89
- Changing the door hinging 90
- Installation 94
- Contact details 107
For the automatic ice cube maker to
operate it must be connected to the
mains water supply.
Ice cube maker with integrated
ice cube tray
The automatic ice cube maker b is
located in the a ice cube freezer
drawer.
As soon as the ice cube maker is
switched on, the ® symbol lights up in
the display and the indicator light
illuminates on the ice cube maker.
An ice cube tray c is integrated in the
ice cube maker b where ice cubes are
produced.
The ice cube tray automatically empties
into the drawer as soon as ice cubes
are produced.
Rinse the ice cube maker along with
the water pipes:
– before installation,
– if the ice cube maker has not been
used for a long time
– in the course of regular use (at
least once a month) to remove ice
residues from the system (this will
avoid a blockage in the water pipes)
and
– before the ice cube maker is to be
switched off for a long time.
See "Cleaning and care - Rinse the
ice cube maker" on how to select
this function.
Ensure the ice cube drawer is empty
before switching on the ice cube
maker.
Making ice cubes
52