Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment 2
- Guide to the appliance 6
- Warning and Safety instructions 10
- How to save energy 19
- Switching the appliance on and off 21
- The correct temperature 25
- Using SuperCool and SuperFreeze 29
- Temperature and door alarm 32
- Further settings 34
- Using the refrigerator efficiently 39
- Storing food in the PerfectFresh Pro zone 41
- Adjusting the interior fittings 45
- Freezing and storing food 48
- Making ice cubes 52
- Automatic defrosting 56
- Cleaning and care 57
- Problem solving guide 65
- Noises 77
- After Sales / Warranty 78
- Information for Miele Centers and Chartered Agents 79
- Mains water connection 81
- Electrical connection 84
- Installation advice 85
- Building-in dimensions 88
- Adjusting the door hinges 89
- Changing the door hinging 90
- Installation 94
- Contact details 107
^
By touching either the X or Y sensor
you can now set whether the safety
lock is to be switched on or off:
0: safety lock is switched off
1: safety lock is switched on
^
Touch the OK sensor to confirm your
selection.
The selected setting is saved and the 0
symbol flashes in the display.
^ Touch the settings sensor to leave
settings mode.
Otherwise, the electronics will leave
settings mode automatically after
approx. one minute.
When the safety lock is switched on, 0
lights up in the display.
Audible tones )
The appliance features audible tones
such as a keypad tone and warning
tone for the door and temperature
alarm.
The keypad tone and door alarm
warning tone can be switched on or off,
but the temperature alarm cannot be
switched off.
You can choose from four setting
options. Option 3 is set at the factory.
This means that both the keypad tone
and the door alarm are switched on.
Switching audible tones on/off
^ Touch the settings sensor.
All selectable symbols appear in the
display and the 0 flashes.
^
Touch the sensors for setting the
temperature (X or Y) repeatedly until
the ) symbol appears in the display.
^
Touch the OK sensor to confirm your
selection.
The last selected setting appears in the
display and the ) symbol lights up.
Further settings
35