Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment 2
- Guide to the appliance 6
- Warning and Safety instructions 10
- How to save energy 19
- Switching the appliance on and off 21
- The correct temperature 25
- Using SuperCool and SuperFreeze 29
- Temperature and door alarm 32
- Further settings 34
- Using the refrigerator efficiently 39
- Storing food in the PerfectFresh Pro zone 41
- Adjusting the interior fittings 45
- Freezing and storing food 48
- Making ice cubes 52
- Automatic defrosting 56
- Cleaning and care 57
- Problem solving guide 65
- Noises 77
- After Sales / Warranty 78
- Information for Miele Centers and Chartered Agents 79
- Mains water connection 81
- Electrical connection 84
- Installation advice 85
- Building-in dimensions 88
- Adjusting the door hinges 89
- Changing the door hinging 90
- Installation 94
- Contact details 107
Certain settings on the appliance can
only be selected in the settings mode.
While you are in settings mode, the
door alarm and any other fault
messages are suppressed, but the
alarm symbol ; lights up in the
display.
Setting options
0 Switching safety lock on/off
® Switching ice cube maker on/off
(set amount of water;
rinse ice cube maker;
set ice cube tray cleaning
position)
) Switching audible tones on/off
s Changing the display brightness
u Adjusting the temperature in the
PerfectFresh Pro zone
¬ Turning Sabbath mode on/off
All setting options for the ice cube
maker are described in "Making ice
cubes" and "Cleaning and care".
Adjusting the temperature in the
PerfectFresh Pro zone is described in
"The correct temperature".
All other setting options are described
below.
Safety lock 0
The safety lock secures against
inadvertent:
–
switching off,
–
temperature changes,
–
selection of Supercool and
SuperFreeze,
–
adjustment of settings (only
switching off the safety lock is
possible).
Switching the safety lock on/off
^ Touch the settings sensor.
All selectable symbols appear in the
display and the 0 flashes.
^
Touch the OK sensor to confirm your
selection.
The last selected setting flashes in the
display and the 0 lights up.
Further settings
34