Operating and Installation Instructions

Operating the appliance
A light touch of the finger on the
sensors is all that is required to operate
this appliance.
Each touch of a sensor is confirmed
with a keypad tone. The keypad tone
can be switched off if you wish (see
"Further settings").
Switching on
The mains connection symbol t
appears in the display when the
appliance is plugged in and switched
on at the wall socket.
^ Touch the On/Off sensor.
The mains connection symbol t
disappears and the appliance starts to
cool.
The sensors for cooling zones that can
be selected appear in the control
panel:
Refrigerator
section
Freezer section
The refrigerator section sensor is
highlighted yellow and the current
temperature in this section appears in
the display.
When the refrigerator door is opened,
the interior lighting comes on and the
LED lighting on the adjustable shelves
becomes brighter until it reaches its
maximum brightness.
When the freezer section is switched on
for the first time, the sensor for this
section and the alarm symbol ; flash
until the set temperature is reached.
The sensor lights up constantly and the
alarm symbol ; goes out when the
temperature set for the freezer section
is reached.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it.
Do not place food in the freezer
section until the temperature is at
least -18 °C.
Switching the appliance on and off
22