Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment 2
- Guide to the appliance 6
- Warning and Safety instructions 10
- How to save energy 19
- Switching the appliance on and off 21
- The correct temperature 25
- Using SuperCool and SuperFreeze 29
- Temperature and door alarm 32
- Further settings 34
- Using the refrigerator efficiently 39
- Storing food in the PerfectFresh Pro zone 41
- Adjusting the interior fittings 45
- Freezing and storing food 48
- Making ice cubes 52
- Automatic defrosting 56
- Cleaning and care 57
- Problem solving guide 65
- Noises 77
- After Sales / Warranty 78
- Information for Miele Centers and Chartered Agents 79
- Mains water connection 81
- Electrical connection 84
- Installation advice 85
- Building-in dimensions 88
- Adjusting the door hinges 89
- Changing the door hinging 90
- Installation 94
- Contact details 107
^
Tighten all screws again.
^ Fit the top cover o, and click it into
place.
^
Fit the side covers p, making sure
they click into place.
To make sure the appliance is
correctly installed:
–
The doors must close properly.
–
The doors must not touch the
housing unit.
–
The seals at the top edge of the
handle side must fit properly.
^
To double check, place a torch in the
appliance and close the doors.
Switch the lights off in the room. If
you can see any light shining out
from the sides, double check the
installation.
Installation
106