Operating and Installation Instructions

Fitting the furniture doors
The furniture door must be a minimum
of 16 mm thick and a maximum of
19 mm thick.
The following dimensions for gaps must
be adhered to:
–
The gap between the furniture door
and the kitchen unit door above must
be at least 3 mm.
–
The vertical gap between the
furniture doors should generally be
3 mm. The exact value is dependent
upon the radius of the edge of the
furniture door.
If the appliance is being built into a run
of units, the height of the furniture door
should be aligned with adjacent kitchen
units.
The furniture door must be mounted
plane and free of tension.
Fitting a door which is heavier than
the maximum permitted could
damage the hinges, which could in
turn affect the functioning of the
appliance.
Before fitting furniture doors, ensure
that the weight of the door does not
exceed the maximum permitted:
Appliance max.
weight
of
upper
door in
kg
max.
weight
of lower
door in
kg
KFNS 37692 iDE 20 12
To fit large or segmented furniture
doors, a mounting kit or another pair
of fixing brackets can be ordered
from Miele.
Installation
101